OXYHTECH Sales D/A/CH

  • plus VAT – including shipping, training, & website linking as an OXYHTECH base!

OXYHTECH DPF cleaning machines

DPF cleaning machines & particulate filter flushing devices from OXYHTECH
The best-selling cleaning system in Germany, Austria & Switzerland

A 99% cleaning result in 50 minutes with TÜV Nord certificate!

With our OYXHTECH DPF & EGR cooler flushing devices, you are guaranteed to clean all particulate filters and EGR coolers with little effort. Very important: We are talking about a complete cleaning of soot and ash! After removing the DPF filter or EGR cooler and clamping it in our cleaning machines, you only need 50 minutes for 99% cleaning, including drying. Our cleaning system also carries out a differential pressure measurement before and after cleaning. This means you no longer need a diagnosis afterwards.

Our particle filter flushing devices are the only cleaning machines that carry out all phases of cleaning, including washing and drying, independently. No more cutting, baking and welding is necessary. During cleaning, 99% of all PM10, AdBlue crystallization, oil and cerium residues are removed. This allows you to offer your customers efficient cleaning for all types of particle filters and catalytic converters of all sizes and designs. The function and safety of the filter is of course fully retained and the DPF, including the precious metals, is completely preserved.

oxyhtech-dpf-cleaner

What makes our DPF and EGR cooler flushing units so special?

Our OXYTECH DPF and EGR cooler flushing devices are and remain something very special. In contrast to alternative methods, such as heat treatment by burning out, ultrasonic cleaning or with chemical additives. It is guaranteed to remove all deposits of soot and ash without jeopardizing the function of the particulate filter. In addition, our DPF cleaning system fits into any workshop thanks to its compact design.

germany-switzerland-austria

Advantages in contrast to heat treatment by burning out:

A particle filter will block for good because of the ash and this ash cannot be burned again. You know this from your charcoal barbecue. During heat treatment, the particle filter must be removed and heated in an oven. The oven must reach 600-750 °C in order to burn only the carbon residues. After around 10 - 12 hours, followed by pneumatic cleaning, the DPF would be ready for use again. Not to forget the necessary, chargeable shipping to a company that can carry out this treatment. This means that your customer will be unable to use their vehicle for up to four days in total.

A differential pressure measurement must still be carried out afterwards. This procedure removes most PM10 deposits, but there is often a risk of damage to the filter. For example, the ceramic on the filter walls could melt due to the high temperatures. Similarly, thermal shock is another risk, as it can damage the precious metals.

Advantages in contrast to ultrasound treatment:

The particle filter is rinsed with water in a tank during ultrasonic treatment. The ultrasound causes micro-bubbles to form at high temperatures and very high pressure. The soot particles are detached from the filter by implosion of the bubbles. The process takes around 12 hours, including drying and pneumatic cleaning.

Although deep cleaning of the filter cells is possible, the results are poor for heavily soiled filters (e.g. due to oil) and for large filters. There is also a risk of damage to the filter due to the vibrations generated by the ultrasound and the implosion of the bubbles. Frequent water changes are necessary to remove any PM10 residues that are deposited in the appliance. This often results in high water consumption and high operating costs.

Advantages in contrast to chemical additives:

The chemical additives are filled into the vehicle tank together with the fuel. The aim is to melt the burnt residues in the filter and remove them through the exhaust pipe. A variety of additives are available for this purpose. The average cost is between 20 and 200 euros. This type of cleaning is simple, but not very beneficial or effective! Residues are not really removed and the additive itself adds combustion deposits again. As a result, the particulate filter will continue to block again and again in the long term.

particle filter flushing device

OXYHTECH DPF & EGR cooler Maxi

Maximum cleaning efficiency

of particulate filters and EGR coolers

for cars & vans

With the OXYHTECH DPF + EGR cooler Maxi, you receive a complete starter set for a professional introduction to cleaning technology. The package includes 12 bottles of cleaning solution, practical instruction and official listing as an OXYHTECH DPF service point with a link on the manufacturer's website - a direct advantage for your visibility and customer acquisition.

The offer does not include VAT and shipping costs. This will not only secure you state-of-the-art technology, but also a strong position on the market

OXYHTECH DPF + EGR Cooler Maxi

Maximum cleaning efficiency

of particulate filters and EGR coolers

for cars, vans and trucks

With the OXYHTECH DPF + EGR cooler Maxi, you receive a complete starter set for a professional introduction to cleaning technology. The package includes 24 bottles of cleaning solution, practical instruction and official listing as an OXYHTECH DPF service point with a link on the manufacturer's website - a direct advantage for your visibility and customer acquisition.

The offer does not include VAT and shipping costs. This will not only secure you state-of-the-art technology, but also a strong position on the market

DPF cleaning machines

Advantages of our particle filter cleaning machines

This is what characterizes our OXYHTECH machines & the cleaning process!

- including differential pressure measurement
- removal of all oil residues
- removal of all cerium residues
- removal of all AdBlue crystallization
- total removal of all PM10 residues
- efficient cleaning of all types of particulate filters and catalytic converters
- high safety for the filter including preservation of precious metals
- only 30 minutes for a car DPF and up to 60 minutes for a truck DPF
- for all cars, heavy commercial vehicles and trucks regardless of size

- Simple, fast and affordable
- and most importantly, a happy and satisfied returning customer

Frequently asked questions

Our process is TÜV-Nord certified and GUARANTEES 99% cleaning quality. In contrast to conventional methods, the particle filter is rinsed gently but thoroughly - without aggressive chemicals or risk of damage.

Our cold rinse works without heating up and is gentle on the filter. With only approx. 20 liters of water per cleaning - instead of 100-200 liters with other systems - we achieve a demonstrably better result. At the same time, energy and operating costs are significantly reduced.

The operating costs are only around 6 euros per wash. This is due to the low water consumption (20 liters), the low energy requirement (only 14-20 watts) and the efficient cold rinsing process.

Certification is a strong sales argument for end customers. It signals tested safety, the highest standards and gives you as a workshop the certainty that you are relying on a demonstrably effective process.

Yes, our system has a modular design and is suitable for almost all car and commercial vehicle filters, trucks and agricultural machinery - regardless of the manufacturer.

A complete flush is usually completed within 50 minutes, depending on the contamination and the diesel particulate filter. This ensures fast throughput times and predictable workshop processes.

Yes, removal is necessary. This is the only way to flush the filter professionally and completely - and to achieve the full 99% guaranteed cleaning of the TÜV-Nord-tested process.

Refer to the TÜV Nord certification and the demonstrable cleaning success. We provide you with marketing materials and technical evidence that you can use directly.

Our dishwasher works efficiently with water and a specially formulated TÜV Nord-certified dishwashing liquid. This keeps the costs per wash very low - and your margin remains attractive.

What advantages do you have with us as your OXYHTECH partner?

We offer you everything from A to Z! If you would like to purchase one of our particle filter dishwashers, the next step is as follows: You can apply for a leasing contract conveniently via our house bank. Of course, we will take care of this complex application process and provide you with the necessary information. You also have the option in conjunction with our HHO Carbon Cleanerto offer your customers an all-round car service with hydrogen engine cleaning. Your customers will then no longer have any problems with coking and the particulate filter.

As the saying goes: "We pave the way for you"!

Contact us for a consultation!

Name
What information would you like?